mekascex.blogg.se - Lowes hasp

The hasp and staple is a similar form of shed door lock to the pad bolt, in that it is fixed to the outside of the shed. Even with an external grade padlock you will need to oil it once a year to keep the parts moving. Use will go rusty and seize up very quickly. Make sure that you buy an external grade padlock. The bolt is locked in place with a padlock. As the bolts will be outside and exposed to theĮlements I would recommend using a galvanised finish. Pad bolts are available in both zinc passivated, black painted and galvanised finishes.

The bolts pass right through the door frame or theĭoor ledger. The only way of removing the hardware from the outside of the door is by cutting it off. Use dome head square neck bolts to secure the housing and receiver to make the fixings as secure as possible. If you choose to use a pad bolt make sure you get the lockable type which is the second image below. Don't use one of these! They are not lockable. The first image below is a standard pad bolt. To lock, the bolt is slid horizontally into a receiver that is fixed to the door frame. Is fixed to the outside of the door and door frame. They consist of a flat or circular bar that slides horizontally within a mounting that Pad bolts, sometimes called Brenton bolts, are often used to secure garden gates. The Gatemate looks like it is made for the job and it is significantly stronger than other locking systems.

The metal body of the lock is made of robust steel and comes supplied with security screws.

The steel 'keep' that the bolt locates into has tolerance, again for doors and structures that move.

The stainless steel bolt has a 'throw' of over 2" which makes it excellent for use with board and batten doors, where tolerances might not be as high as internal environments.

Three reasons the Gatemate makes such a good shed lock are: This product comprises a 1" stainless steel bar that is locked with a high security 6 pin lock. Probably the neatest looking of all of the lock types, from the outside.Ī recent improvement on the traditional Rim Lock is the 'Long throw bolt' type lock.Īn excellent example of this is the 'Gatemate'. View of a rim lock set, from the outside. epĪ determined intruder can easily force the door open as the lock is only held in place by wood screws. However they are possibly the least secure of the shed door lock options.

This type of shed door lock is convenient to use and quite unobtrusive as the body of the lock is on the inside of the shed door.

This means that the door can be opened and closed without

Many locks of this type have a latch bolt/spring bolt as well as a deadbolt. Into a strike plate or keep, fixed to the frame of the door. The lock is fixed to the inside of the door with wood screws. Rim locks are the least secure of the options. There are four basic lock types you could use: So what types of shed door lock are suitable for a ledged and braced door? There is a balance to be struck between security and convenience of access to your shed. But having three locks to undo must make opening the door a bit of a chore. You do see some sheds that have locksįixed to the upper and lower ledgers as well. Locks for ledged and braced doors are normally fixed to the central ledger at the mid-height. However most shed doors are of the ledged and braced variety and don't have a solid timber frame around the perimeter. A fully framed door can have a mortice lock in the same The type of shed door lock that you use is driven by the type of door on your shed. Shed Door Locks are the first line of defence to keep unwanted visitors out of your shed